MPPT3030-DC
MPPT SOLAR STREET LIGHT CONTROLLER
MPPT SOLAR CHARGE CONTROLLER 30A
MPPT-DC series lithium voltage and constant current integrated solar controller integrates MPPT solar
maximum power tracking, charge management, LED voltage and constant current drive,
infrared/microwave induction, remote communication and other functions in one, suitable for single and
two lithium batteries, widely used in solar street lights and other occasions. It has the characteristics of
high reliability, high efficiency, high precision, simple installation and easy maintenance, which can
reduce the cost of the entire street lamp system
- Innovative MPPT technology, tracking efficiency >99.9%
- manual.
- Full digital technology, conversion efficiency up to 92.5%
- Can output constant current
- 5 stages time and dimming can be adjusted
- Can read parameters and running status
- If battery voltage is low, it can be set to dimming
- Dimming start voltage and percentage can be set
- Day/Night threshold can adjust automatically
- Suitable for single、two Lithium battery
- Auto sleeping during transportation
- Low temperature charging protection
- When BMS power off because of LVD, it can activate the system automatically
- Charging target voltage and recovery voltage can be set
- Remote Unit to configure, with LCD display
- IP67, Strong and durable aluminum case
- Full automatic electronic protect function
| Item |
MPPT2030-DC40G/RS485 (Select/R/V)*1 |
MPPT3030-DC60G/RS485 (Select/R/V) |
|
| Battery Parameters | Max Charging Current | 20A | 30A |
| MPPT Charging Voltage | <Charging target voltage | ||
| Charging voltage target | 3.0~9.0V (Programmable,default: 3.6V) | ||
| Charging voltage recovery | 2.9~8.9V (Programmable,default: 3.4V) | ||
| Low voltage disconnect | 2.4~7.2V (Programmable,default: 2.6) | ||
| Low voltage reconnect | 2.6~7.4V (Programmable,default: 3.0) | ||
| Battery Type | Lithium | ||
| 0℃ Charging protection | Yes, Slow, No (Programmable,default: Yes) | ||
| Max volt on Bat. Terminal | 10V | ||
| Panel Parameters | Max volt on PV terminal | 13~30V | |
| Max input power | 80W/32V；160W/6.4V | 100W/3.2V | |
| MPPT tracking range | （Vb+1.0V）~Voc*0.9 *2 | ||
| Dusk/Dawn detect volt. | 1.0~7.0V (Programmable,default: 2.0V) | ||
| Day/Night delay time | 0~30min (Programmable,default: 0 min) | ||
| Load Parameters | Output Current | 0.1~4A (Programmable,default: 0.3A) | |
| Output Voltage | 5~35V/3.2V；9~35V/6.4V | 5~35V/3.2V | |
| Output power | 40W/3.2V；80W/6.4V | 60W/3.2V | |
| Min Current | 100mA | ||
| Current precision | ±2% | ||
| Dimming | 0~100% | ||
| Auto dimming | Yes, No(Programmable,default: Yes) | ||
| Voltage of start dimming | 2.8~Charging target voltage (Programmable,default: 3.3V) | ||
| Dimming percentage | 0~40% (Programmable,default: 20%) | ||
| System Parameters | Max tracking efficiency | >99.9% | |
| Max charge conversion | 92.5% | ||
| Max LED driver efficiency | 91.5% | ||
| Self consumption | ＜40mA@3.2V | ||
| Dimensions | 90.5*88.5*24.3mm | 145*89.6*25mm | |
| Weight | 307g | 546g | |
| Ambient temperature | -35~+60℃ | ||
| Ambient humidity | 0~100%RH | ||
| Protection degree | IP67 | ||
| Max Altitude | 4000m | ||
Application scenariosMORE >